China OEM Hst-32 Harmonic Drive High Gear Ratios Wave Reducer High Rigidity Servo and Stepper Motors with Good quality

Item Description

Merchandise Description:

1. Flexspline is a hollow flanging standard cylinder construction.

2. There is a large-diameter hollow shaft hole in the center of the cam of the wave generator. The internal design and style of the reducer has a help bearing.

3. It has a completely sealed construction and is easy to put in. It is very suitable for occasions in which the wire needs to be threaded from the centre of the reducer.
 

Rewards:
1. High precision,high torque
two. Devoted specialized personnel can be on-the-go to provide design and style solutions
three. Factory direct revenue fine workmanship durable good quality assurance
four. Item quality troubles have a a single-yr guarantee time, can be returned for alternative or fix

Firm profile:

 

HangZhou CZPT Technological innovation Co., Ltd. established in 2014, is committed to the R & D plant of large-precision transmission elements. At present, the annual generation ability can reach 45000 sets of harmonic reducers. We firmly believe in good quality initial. All back links from raw supplies to completed products are strictly supervised and controlled, which gives a sound foundation for product quality. Our items are marketed all over the region and overseas.

The harmonic reducer and other high-precision transmission elements had been independently designed by the company. Our firm spends 20% of its product sales every calendar year on the analysis and advancement of new technologies in the industry. There are 5 folks in R & D.

Our advantage is as under:

1.7 many years of advertising experience

2. 5-individual R & D crew to give you with complex support

three. It is sold at house and overseas and exported to Turkey and Ireland

4. The merchandise high quality is confirmed with a one particular-12 months warranty

five. Goods can be tailored

Toughness factory:

Our plant has an complete campus The variety of workshops is around 300 Whether it is from the generation of uncooked resources and the procurement of raw resources to the inspection of concluded goods, we are carrying out it ourselves. There is a comprehensive manufacturing system

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start off quit The allowable highest of the typical load torque Maximum torque is permitted in an instantaneous Allow the maximum pace to be entered Common input speed is allowed Back gap layout daily life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 six.2 .six twenty.seven two.one 7.nine .7 forty.3 4.one 7000 3000 ≤30 10000
eighty 9 .nine 27 two.7 12.seven 1.3 fifty four.1 5.5
one hundred 9 .9 32 3.three 12.seven 1.three sixty two.one 6.three
17 50 eighteen.4 one.9 39 4 29.9 three eighty.5 eight.2 6500 3000 ≤30 15000
eighty 25.3 2.6 forty nine.5 five 31 3.two a hundred.one ten.2
one hundred 27.6 two.8 62 six.three 45 four.six 124.2 twelve.7
20 fifty 28.8 two.nine sixty four.four six.6 39 four 112.seven 11.5 5600 3000 ≤30 15000
eighty 39.one four 85 eight.8 fifty four five.5 146.one 14.9
a hundred 46 4.seven ninety four.three nine.6 fifty six five.eight 169.one seventeen.two
120 46 4.seven one hundred ten.2 56 five.8 169.one 17.two
160 forty six 4.7 100 ten.two 56 five.8 169.1 seventeen.two
25 50 forty four.nine 4.six 113 eleven.5 63 6.five 213.9 21.8 4800 3000 ≤30 15000
80 seventy two.five 7.four 158 16.one 100 ten.2 293.three 29.9
one hundred 77.one 7.9 181 18.4 124 12.seven 326.6 33.three
one hundred twenty seventy seven.1 seven.nine 192 19.6 124 twelve.7 349.6 35.six
32 50 87.four 8.nine 248 twenty five.3 124 12.7 439 44.eight 4000 3000 ≤30 15000
80 135.7 13.8 350 35.six 192 19.six 653 66.6
100 157.6 16.one 383 39.one 248 twenty five.three 744 75.9
40 one hundred 308 37.two 660 sixty seven 432 forty four 1232 126.7 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at begin quit The allowable optimum of the regular load torque Maximum torque is permitted in an instant Permit the maximum velocity to be entered Typical input pace is authorized Back again hole design and style lifestyle
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty seven .7 23 2.three nine .9 46 4.7 14000 8500 ≤20 15000
eighty ten 1 30 three.1 fourteen 1.four sixty one 6.two
100 10 1 36 three.seven fourteen one.four 70 7.2
17 fifty 21 two.1 forty four 4.5 34 3.four 91 nine 10000 7300 ≤20 20000
80 29 2.9 56 5.seven 35 3.six 113 12
100 31 3.2 70 seven.2 fifty one 5.2 143 fifteen
20 fifty 33 3.3 seventy three seven.four 44 4.5 127 thirteen 10000 6500 ≤20 20000
eighty 44 four.5 ninety six 9.eight 61 6.two a hundred sixty five seventeen
a hundred 52 5.3 107 10.nine 64 six.5 191 twenty
120 52 five.3 113 11.5 sixty four 6.5 191 20
160 fifty two five.three one hundred twenty twelve.2 sixty four six.five 191 20
25 fifty 51 5.2 127 13 seventy two seven.3 242 25 7500 5600 ≤20 20000
80 eighty two 8.4 178 18 113 twelve 332 34
100 87 8.9 204 21 a hundred and forty fourteen 369 38
one hundred twenty 87 eight.nine 217 22 one hundred forty fourteen 395 40
32 fifty 99 ten 281 29 140 14 497 fifty one 7000 4800 ≤20 20000
eighty 153 16 395 40 217 22 738 seventy five
a hundred 178 eighteen 433 44 281 29 841 86
40 one hundred 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Exhibitions:
Software circumstance:

FQA:
Q: What ought to I provide when I pick a gearbox/velocity reducer?
A: The greatest way is to provide the motor drawing with parameters. Our engineer will check out and advise the most suitable gearbox product for your reference.
Or you can also provide the below specification as nicely:
one) Kind, design, and torque.
2) Ratio or output speed
three) Working problem and connection method
four) Top quality and mounted device name
5) Enter mode and input velocity
six) Motor brand name model or flange and motor shaft dimensions

When looking at a reducer vs a gearbox, typically the only difference is terminology. This is because all reducers are gearboxes. Even so, not all gearboxes are retarders. This may audio challenging, but it really is actually really easy. A reducer is a gear established among the motor and the equipment. The goal of the reducer is to minimize the rotational velocity transferred amongst these two endpoints. The reducer amplifies and multiplies the torque (input) created by the motor. Next, a reducer, as the identify implies, reduces the pace of the enter (output in rpm) so that the output is the appropriate velocity. The term “gearbox” is just a generic time period utilized for the gear train among the motor and the device. Consequently, all reducers are gearboxes. Nonetheless, not all gearboxes decrease input velocity. Despite the fact that unusual, gearboxes can really boost input speeds. By significantly the most typical type of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.
Gearboxes are mechanical products that aid push methods preserve ideal velocity and torque for programs. Also identified as gearboxes and gear drives, they lessen the rotational speed of the enter shaft by a particular share and boost the energy sent to the output shaft by the very same proportion. Ratio multipliers increase the deceleration and torque supplied by the reducer by a specified ratio and are suitable for parallel installations. Mounting bases, torque arms and flange couplings are accessories utilized with the reducer. They are normally utilized in apps exactly where the reducer is not directly related to the push system.

China OEM Hst-32 Harmonic Drive High Gear Ratios Wave Reducer High Rigidity Servo and Stepper Motors     with Good quality