China best Flange Mounted G3 Motor Power Transmission Helical Gear Reducer with Great quality

Solution Description

 

 

Solution Description

Main Functions:
1) Made of high high quality materials,  non-rustingBoth flange and foot mounting offered and suitable for all-spherical installation
two) Huge output torque and high radiating efficiency
three)Specific grinding helical equipment with Clean operating and low sound, no deformation,can operate long time in dreadful situation
four)Good look, resilient services life and little volume, compact composition
five)The two 2 and 3 phase available with extensive ratio selection from 5 to two hundred
six)Different output shaft diameter accessible eighteen-22-28-32-forty-50mm
seven)Modular construction enlarge ratio from 5 to 1400

Primary Supplies:
one)housing with aluminium alloyand forged iron substance
two)Output Shaft Content:20CrMnTi
3)Great good quality no sounds bearings to preserve long service daily life
4)Higher overall performance oil seal to prevent from oil leakage

Purposes:
G3 Collection helical equipment motor are wide utilized for all sorts of automatic tools, these kinds of as chip elimination equipment, conveyor, packaging products, woodworking equipment, farming tools, slurry scraper ,dryer, mixer and so on.
 

Item Parameters

 

(n1=1400r/min  50hz)
norminal ratio 5 ten 15 20 twenty five thirty 40 fifty sixty eighty a hundred a hundred one hundred twenty a hundred and sixty   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 ninety two 70 56 46 35 28 23 18 14 11 9 seven
M2(Nm) 50hz 3.two six.five 9.8 twelve.9 sixteen.one 19.6 twenty five.7 31.1 37.five forty nine.five 62.nine seventy six.1 100.7 one hundred twenty five.four
60hz 3 5 eight eleven 13 17 21 26 31 41 52 sixty three 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio five 10 15 20 twenty five thirty forty fifty 60 80 one hundred one hundred one hundred twenty 160 two hundred
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 ninety two 70 fifty six 45 35 29 23 18 fourteen thirteen 12 8 seven
M2(Nm) 50hz 6.five 12.6 19.1 26.3 32.6 38.nine 50.4 63 seventy five.six 100.eight 103.9 a hundred twenty five.four 150 two hundred.four 250.7
60hz 5.four 10.5 16.6 21.nine 27.1 32.4 forty two 52.5 63 eighty four 86.6 104.five 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio five ten fifteen 20 twenty five 30 forty 50 60 80 a hundred 100 a hundred and twenty a hundred and sixty 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 ninety two 72 fifty eight 47 36 29 24 18 14 14 twelve nine 7
M2(Nm) 50hz twelve.nine twenty five 38.6 51.4 sixty five.four 78.two a hundred.seven 125.4 150 two hundred.4 206.eight 250.7 301.1 400.7 461.8
60hz ten.7 20.eight 32.one 42.nine fifty four.five 65.2 eighty three.nine 104.5 a hundred twenty five 167 172.three 208.nine 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 twenty five 30 40 fifty 60 eighty one hundred a hundred one hundred twenty a hundred and sixty two hundred
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 a hundred and forty 94 sixty nine fifty eight forty six 35 29 24 18 14 14 eleven 9 seven
M2(Nm) 50hz 24.6 48.2 seventy two.9 97.five 122.1 a hundred forty five.seven 187.5 235.seven 282.nine 376.one 387.nine 439 527 703 764
60hz 20.5 40.two sixty.7 81.three 201.8 121.4 156.3 196.4 235.seven 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio five ten 15 twenty 25 30 forty fifty 60 80 100 one hundred 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 ninety three 70 fifty five 47 34 27 24 seventeen 14 thirteen twelve 8 seven
M2(Nm) 50hz forty eight.2 97.5 a hundred forty five.7 193.9 242.one 272 351 439 527 703 724 878 1060 1230 1230
60hz forty.two 81.three 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 ten 15 20 25 30 40 fifty sixty eighty one hundred        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 sixty eight fifty four 45 36 28 24 eighteen 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1571 1230        
60hz fifty six 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

Define and mounting dimension:

G3FM: 3 Section Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
normal brake
0.1kw  Ø18 5-ten-fifteen-twenty-twenty five-thirty-40-fifty 236 270 192.five eleven sixteen.five 170 four ten thirty 145 35 18 20.five 129 six 157 80 eighty one
 Ø22 60-80-a hundred-a hundred and twenty-a hundred and sixty-two hundred 262 296 197.five 11 19 185 four twelve forty 148 47 22 24.five 129 six 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-twenty-twenty five 267 270 192.five 11 sixteen.5 one hundred seventy 4 10 thirty a hundred forty five 35 eighteen twenty.5 129 six 161 eighty 81
 Ø22 thirty-40-fifty-60-80-a hundred 293 296 197.five 11 19 185 4 twelve forty 148 forty seven 22 24.5 129 6 171.5 89.five eighty three.five
 Ø28 one hundred-120-one hundred sixty-two hundred 306 309.five 208.5 eleven 23.five 215 four 15 forty five 170 50 28 31 129 eight 198.5 one hundred and five.five 88
0.4kw  Ø22 five-10-fifteen-20-twenty five 314 324.five 204 11 19 185 four twelve forty 148 47 22 24.5 139 six 171.five 89.five 88.five
 Ø28 thirty-forty-fifty-60-80-one hundred 330 337.5 215 11 23.five 215 4 fifteen 45 a hundred and seventy 50 28 31 139 8 198.five a hundred and five.five 93
 Ø32 one hundred-120-a hundred and sixty-200 349 357 229.five 13 28.five 250 four 15 fifty five 180 sixty 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-fifteen-20-twenty five 350.5 343.five 227.five eleven 23.5 215 four fifteen forty five one hundred seventy fifty 28 31 159 eight 198.5 one hundred and five.five 103
 Ø32 30-forty-fifty-60-eighty-a hundred 379.five 387 242 thirteen 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 one hundred-one hundred twenty-160-two hundred 401.5 408.5 270 18 34 310 5 18 sixty five 230 71 40 forty three 185 12 284 149 126.five
1.5kw  Ø32 5-10-15-twenty-twenty five 420.5 441 254 13 28.five 250 5 15 55 180 sixty 32 35 185 ten 234 126 121
 Ø40 30-40-fifty-60-eighty-a hundred 457.five 478 270 18 34 310 five 18 sixty five 230 seventy one forty forty three 185 twelve 284 149 126.5
 Ø50 one hundred-a hundred and twenty-a hundred and sixty-two hundred 485.5 506 three hundred 22 40 360 five twenty five seventy five 270 eighty three 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 five-10-fifteen-twenty-twenty five 466.5 487 270 18 34 310 5 eighteen 65 230 71 40 forty three 185 12 284 149 126.5
 Ø50 30-40-fifty-sixty-eighty-one hundred 510.five 531 300 22 40 360 5 twenty five 75 270 83 50 53.5 185 14 325 173.five 132.5


 

G3LM: A few Stage Equipment MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 five-10-15-20-twenty five-30-forty-fifty 236 270 40 one hundred ten a hundred thirty five sixteen.five sixty five 9 forty five thirty eighteen twenty.5 129 183 6 133 85 ten
 Ø22 sixty-eighty-100-a hundred and twenty-a hundred and sixty-two hundred 262 296 65 a hundred thirty one hundred fifty five 19 90 11 fifty five forty 22 24.five 129 193 6 139.five 90 twelve
0.2kw  Ø18 5-ten-fifteen-twenty-twenty five 267 270 40 one hundred ten one hundred thirty five 16.5 sixty five 9 forty five thirty eighteen twenty.five 129 183 six 133 85 ten
 Ø22 30-40-fifty-sixty-eighty-one hundred 293 296 sixty five one hundred thirty 155 19 ninety eleven 55 40 22 24.5 129 193 6 139.5 90 twelve
 Ø28 one hundred-120-one hundred sixty-two hundred 306 309.five ninety 140 175 23.five a hundred twenty five 11 sixty five 45 28 31 129 203 eight a hundred and seventy 110 fifteen
0.4kw  Ø22 five-10-15-twenty-25 314 324.5 sixty five 130 a hundred and fifty five 19 ninety eleven fifty five 40 22 24.5 139 199.5 six 141.five 90 twelve
 Ø28 30-40-50-60-eighty-one hundred 330 337.5 ninety one hundred forty one hundred seventy five 23.5 125 eleven sixty five forty five 28 31 139 210 eight 170 one hundred ten fifteen
 Ø32 a hundred-one hundred twenty-one hundred sixty-two hundred 349 357 130 a hundred and seventy 208 28.five a hundred and seventy 13 70 55 32 35 139 226 10 198 one hundred thirty eighteen
0.75kw  Ø28 5-ten-15-twenty-25 350.5 343.five ninety 140 175 23.5 125 eleven sixty five forty five 28 31 159 222 8 170 110 fifteen
 Ø32 thirty-40-fifty-sixty-80-a hundred 379.five 387 130 170 208 28.5 a hundred and seventy thirteen 70 fifty five 32 35 159 238.5 ten 198 130 eighteen
 Ø40 100-120-one hundred sixty-200 401.five 408.five one hundred fifty 210 254 34 196 15 90 65 40 43 185 249 twelve 230 150 20
1.5kw  Ø32 five-ten-15-20-twenty five 420.5 441 a hundred thirty 170 208 28.5 a hundred and seventy 13 70 55 32 35 185 250.five ten 198 130 18
 Ø40 30-40-fifty-sixty-80-one hundred 457.five 478 150 210 254 34 196 fifteen 90 sixty five 40 43 185 260 twelve 230 150 20
 Ø50 100-120-160-200 485.five 506 a hundred and sixty 230 290 forty 210 eighteen one hundred seventy five fifty fifty three.5 185 288 fourteen 265 170 twenty five
2.2kw  Ø40 five-ten-15-20-25 466.5 487 a hundred and fifty 210 254 34 196 15 90 sixty five 40 forty three 185 260 twelve 230 150 twenty
 Ø50 30-40-fifty-60-eighty-100 510.five 531 160 230 290 forty 210 18 one hundred seventy five fifty fifty three.five 185 288 fourteen 265 one hundred seventy twenty five

 

Packaging & Delivery

Following Income Support

1.Routine maintenance Time and Guarantee:In 1 yr after getting products.
two.Other ServiceSuch as modeling assortment information, installation guidebook, and difficulty resolution information, etc

FAQ

1.Q:Can you make as for every consumer drawing?
A: Indeed, we provide customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
A: 30% deposit before production,stability T/T ahead of shipping.
3.Q:Are you a trading organization or producer?
A:We are a manufacurer with superior equipment and experienced workers.
four.Q:What’s your manufacturing capability?
A:4000-5000 PCS/Month
5.Q:Free of charge sample is obtainable or not?
A:Yes, we can supply free of charge sample if customer concur to pay out for the courier cost
six.Q:Do you have any certification?
A:Yes, we have CE certification and SGS certification report.

Get in touch with info:
Ms Amy Zhou
For any concerns just feel totally free ton get in touch with me. Several thanks for your sort consideration to our firm!

 

Beneath is a listing of our presently offered industrial gearboxes. If you are not able to find what you are looking for, you should speak to the manufacturing unit for much more choices. At EP, we are constantly creating new goods and retrofitting outdated ones to meet customer demands.
We are seasoned transmission sellers and supply a wide range of transmissions, an crucial element of a lot of drive programs. Gearboxes can be utilized to reduce or improve pace, boost torque, reverse or modify the direction of a travel shaft. Gearboxes are also acknowledged as gear drives, pace reducers, equipment motors, speed reducers and equipment reducers.

China best Flange Mounted G3 Motor Power Transmission Helical Gear Reducer     with Great quality